You’ll find the STRG Kayak Fish Finder Mount is a rugged, versatile option that fits most popular Garmin and Lowrance portable units and works on sit-in kayaks, sit-on-tops, SUPs, and small boats. It uses marine-grade composite and aluminum, sealed joints, and anodized fasteners to resist salt, UV, and impacts. A rectangle plate, 1.5" ball clamp, and included transducer arm give secure, adjustable positioning. Below you’ll get installation tips, pros, cons, and fit guidance.
Some Key Takeaways
- Durable marine-grade composite and aluminum construction resists salt, UV, and vibration for reliable kayak use.
- Rectangle plate fits Garmin, Lowrance, and many fishfinders without extra adapter plates for broad compatibility.
- 1.5" ball clamp offers smooth, secure adjustments and repeatable positioning while paddling.
- Included transducer arm allows flexible placement and articulation to optimize sonar readings and avoid prop wash.
- Best for kayak, SUP, and small-boat anglers seeking a portable, rugged mount; not ideal for ultra-light or permanent OEM installs.
Which Kayaks and Fishfinders the STRG Kayak Fish Finder Mount Fits
The STRG Kayak Fish Finder Mount fits a wide range of kayaks, SUPs, and small boats and works with most popular fishfinder and chartplotter models; its rectangle mounting plate and multiple screw-hole patterns let you attach Garmin ECHOMAP, GPSMAP, Striker, and Lowrance Elite/HDS/Hook series units without adapter plates. You’ll find sit in compatibility with common touring and angler kayaks, plus many sit on top boats and SUPs using the track mount. The included transducer arm gives flexible transducer placement for clear readings. Overall, you get broad device fitment and adaptable sensor positioning that supports independent, untethered exploration on the water. It’s also useful for beginners who want essential handheld GPS gear and tips when navigating from a kayak.
How the Mount Is Built: Materials, Corrosion Resistance, and Durability
Because you’ll be mounting sensitive electronics in a harsh marine environment, Strg builds the mount from marine-grade high-strength composite and marine-grade aluminum to resist salt, UV, and mechanical stress. You’ll notice marine grade polymers where weight savings and impact resistance matter, paired with aluminum for structural load. Corrosion resistance is engineered, not claimed: sealed joints, protective coatings, and anodized fasteners reduce galvanic attack. Durability shows in tight tolerances and reinforced stress points that resist vibration and repeated adjustments. You can expect long service life with minimal maintenance, letting you focus on exploration rather than constant hardware care. The design is optimized specifically for kayak anglers with a focus on mount stability and ease of use.
Plate, 1.5 Ball, and Transducer Arm : How the System Works and Adjusts
Having covered materials and corrosion resistance, let’s look at how the plate, 1.5" ball, and transducer arm work together to give you precise positioning and secure hold. You mount the rectangle plate, align screw patterns, then use the 1.5" ball to clamp your device; its ball adjustment gives strong grip without binding. The transducer arm secures the sensor and allows fine arm articulation for ideal sonar angle. You’ll appreciate the smooth, repeatable adjustments and the freedom to reorient gear quickly. Overall the system balances rigidity and flexibility, delivering reliable positioning for varied paddling and fishing scenarios. Many kayakers also prefer systems with adjustable transducer arms because they allow easier depth and angle tuning.
Step-by-Step Installation and Mounting Tips for Kayaks, SUPs, and Small Boats
While you’ll follow a few basic steps, start by planning placement to avoid drilling in weak spots and to keep wiring neat. You’ll position the rectangle plate where it clears cockpit gear and offers sightlines. Mark holes, test-fit the 1.5" ball, then drill with appropriate bits. Use marine-grade fasteners and sealant; tighten but don’t over-torque. Fit the transducer arm so it avoids prop wash and damage. Employ quick release mechanisms where you need portability. Route cables with cable management strategies—clips, conduit, and zip-ties—to prevent snags. Final-check alignment, function, and waterproofing before heading out. Consider choosing a mount compatible with popular portable fish finders for kayaks and beginner paddlers, as a portable fish finder friendly design makes setup and transport much easier.
Real-World Pros, Cons, and Who Should (or Shouldn’t) Buy This Mount
If you need a rugged, flexible mounting solution for a kayak, SUP, or small boat, the Strg Kayak Fish Finder Mount delivers: its marine-grade composite and aluminum parts stand up to saltwater, the 1.5" ball and multi-hole rectangle plate fit a wide range of Garmin and Lowrance units, and the included transducer arm gives you placement options to minimize prop wash and damage. You’ll like robust build, easy adjustability, and broad compatibility. Consider weight capacity for larger chartplotters and expect minimal user maintenance. Avoid it if you want ultra-light gear or permanent factory-style installs; otherwise it’s a strong, versatile choice. Many kayakers and beginners find that pairing the mount with dedicated fish finder gear simplifies installation and improves results.
Some Questions Answered
Can I Mount Two Fishfinders Simultaneously on This System?
Yes — you can mount dual screens, but you’ll need to plan placement and cable routing. The rectangle plate’s multiple hole patterns and 1.5" ball give flexibility to install two smaller units or a larger plus a compact display. You’ll route power and transducer cables carefully along the arm and kayak to avoid tangles and interference. Expect to secure cables and possibly use extensions or splitters for a clean, reliable setup.
Is It Compatible With Ram-Style Arm Accessories or Bases?
Yes — it’s RAM compatibility-friendly if you use the right Adapter requirements. You can attach RAM-style arms or bases to the mount’s 1.5" ball plate by fitting a compatible RAM adapter or ball-to-plate converter. You’ll get strong clamping and smooth motion, but verify hole patterns and adapter size before buying. You’ll keep flexibility and freedom to mix accessories while ensuring secure, corrosion-resistant performance backed by lifetime support.
Does the Mount Affect Kayak Balance or Storage When Not in Use?
No, it won’t markedly upset your kayak’s balance if you mount it properly; the mount’s weight distribution is modest and designed to sit low and centered. When not in use, you can remove or fold components to minimize impact; storage solutions like stowing the transducer arm in a hatch or using a gear bag keep clutter down. These choices preserve stability and let you keep exploring freely without compromise.
Are Replacement Parts (Ball, Plate, Arm) Available Separately?
Yes — you can get spare components like the ball, plate and arm separately. You’ll order replacements through the manufacturer or support email; warranty coverage may apply if failure’s due to defects. You’ll want to confirm part compatibility for your exact model and any shipping fees. This keeps your setup serviceable, lets you swap parts without buying a whole mount, and preserves the freedom to customize or repair on your schedule.
Can I Use This Mount for a Small Outboard Motor Transducer?
Yes — you can use it for a small outboard motor transducer if the transducer compatibility and mounting angle suit your unit. You’ll need to match hole patterns on the rectangle plate and make certain the 1.5" ball and transducer arm let you achieve the correct mounting angle for clear readings. The marine-grade materials resist corrosion, and lifetime warranty backs reliability, but confirm physical fit and cable routing before final installation.
