You’ll find the Reeyak Aluminum Bracket Kit a simple, no-drill way to add a small trolling motor or accessories to most flush-rod kayaks. It’s anodized aluminum with stainless hardware and a nylon clamp, so it’s lightweight, corrosion-resistant, and holds about 165 lbs. Installation is quick: slide the bar into the rod hole, position the legs, tighten, and go. It won’t fit curved rod holders, but otherwise performs well — keep going to see fit tips, limits, and alternatives.
Some Key Takeaways
- Anodized aluminum bracket kit provides lightweight, corrosion-resistant support for small trolling motors and accessories on rod-holder-equipped kayaks.
- Installs without drilling: slide the 43.3-inch bar into standard flush rod holes and adjust two legs and nylon clamp for stability.
- Fits most straight, standard flush rod holders and common gear rails (Scotty, Ram, Eco); not compatible with curved rod holders.
- Durable hardware: stainless screws and nuts plus nylon clamp padding protect motor housing and resist saltwater corrosion.
- Quick, removable setup good for short runs or extended trips, supporting about 165 lbs with low added noise and minimal battery impact.
Quick Verdict: Who the Reeyak Kayak Motor Mount Kit Is Best For
If you want a lightweight, corrosion-resistant way to add a trolling motor or accessories to a rod-holder-equipped kayak, the Reeyak Kayak Motor Mount Kit is a smart fit. You’ll appreciate its anodized aluminum, stainless hardware, and nylon clamp if you’re a target anglers type who values reliability and quick portability. It slips into standard rod holes, needs no kayak mods, and adjusts for left or right setups so you’ll stay flexible on the water. Use it for short runs, scouting, or extended freedom-seeking trips where you want power without permanent changes to your craft. For kayakers who also shop for electronics, consider pairing it with portable fish finders like those popular with kayak anglers.
What’s in the Box and Build Quality You Can Expect
Having decided the Reeyak kit fits your needs, here’s exactly what arrives and how it's built: the box contains a 43.3-inch anodized aluminum bar, two 7.87-inch legs, an engine-block board, two screws with nuts, a wrench and a manual, and the components feel solid and purpose-made. You’ll notice the anodized finish resists scratches and salt, stainless hardware shows clear hardware durability, and nylon clamp padding protects your motor housing. The parts feel balanced for easy transport, and the listed weight capacity (165 lbs rotate) gives real confidence. It’s rugged, streamlined, and ready for freedom on the water. This kit pairs well with other essential kayak gear like power pole setups for reliable anchoring and stability.
Install and Use in 3 Steps (Fit, Adjust, Remove)
When you’re ready to mount the Reeyak bracket, the whole process breaks down into three quick steps: fit the bar into your kayak’s rod holder, adjust the legs and clamp for a snug, level position, then remove it just as fast when you’re done. Step 1: slide the 43.3-inch anodized bar into the flush rod hole and perform fit testing—check left/right orientation and hull clearance. Step 2: loosen the nylon clamp, slide legs to match hull angle, tighten stainless hardware until stable and level. Step 3: enjoy tool free removal—loosen, lift out, and you’re free to go. For many beginner kayakers, choosing the right mount also means understanding kayak rod holder compatibility and horizontal rod holders can help guide that decision.
Compatibility Checklist: Which Kayaks, Rod Holders, and Systems It Fits
Wondering whether the Reeyak mount will work with your boat? You’ll find it fits most sit-on-top and hybrid kayak models that use straight, standard flush rod holders—no drilling required. It won’t seat well in curved rod holders, so check yours first. The bar slides into Scotty, Ram, and Eco-style gear rails and accepts common rod adapters and accessory mounts. Legs adjust for hull width and inclined holders, and you can set it left- or right-hand. If your kayak has built-in straight rod tubes or compatible rail systems, you’ll bolt in quickly and regain freedom on the water. The mount is especially popular with flush mount rod holders enthusiasts who want a simple, removable solution.
Pros, Cons, and Whether to Buy (Price, Alternatives, Final Recommendation)
If you want a sturdy, no-drill solution that gets a trolling motor or accessories mounted quickly, the Reeyak Aluminum Kayak Motor Mount delivers—its anodized marine‑grade aluminum, nylon clamp, and stainless hardware feel built to resist corrosion and handle up to about 165 lbs of load. Pros: quick install, solid build, fits common rod holders, minimal impact on battery life and low noise level when paired with a quality motor. Cons: not for curved rod holders, limited to kayaks with flush inserts. Price is reasonable for durability. Consider Scotty or Ram alternatives; check shipping speed and customer service before buying. This mount pairs well with kayakers who need durable gear for varied terrain and all-terrain carts to move their setup easily.
Some Questions Answered
Can It Support Electric Motors Heavier Than 165 Lbs?
No — you shouldn’t exceed the 165 lb weight capacity. You’ll compromise safety and void stability testing limits if you try heavier motors. Stick to the specified load to keep the mount stable and corrosion-resistant in real conditions. If you need more power, choose a sturdier bracket or redistribute weight and test stability before heading out. You’ll preserve freedom on the water by matching gear to rated specs and verified testing.
Is the Mount Suitable for Saltwater Use Long-Term?
Yes — you can use it long-term in saltwater if you treat it right. The anodized aluminum and stainless hardware offer good corrosion resistance, but you’ll need a maintenance regimen: rinse with fresh water after each use, inspect fasteners, and apply corrosion inhibitor. Add a sacrificial anode if exposed to dissimilar metals and verify galvanic compatibility with your motor and accessories. Do that and it’ll give dependable, freedom-friendly service.
Does It Interfere With Kayak Storage or Hatch Access?
No — it won’t block storage compatibility or hatch clearance if you install it correctly. You’ll slide the aluminum bar into rod holders so it sits above hatches and adjusts for hull width, keeping access open. For tight layouts, position the legs to clear lids and move it aside easily — it detaches in seconds. You’ll retain practical access to gear and enjoy freedom on the water without sacrificing usable storage space.
Can Two Mounts Be Installed on One Kayak Simultaneously?
Yes — you can install dual installation; the mount supports two units if your kayak has enough rod holders and hull width. You’ll want mounting symmetry for balance: space them evenly, mirror left/right positions, and make certain clamps clear hatches and gear. Adjust leg length and angle so both operate without interference. You’ll enjoy added freedom for trolling and accessories while keeping stability and easy removal when you’re done.
Are Replacement Parts or Extra Legs Available Separately?
Yes — replacement availability is limited but possible; contact Reeyak or your retailer for spare legs and individual parts. You’ll want to reference the model/ASIN and part names when you ask. Keep receipts and photos handy to speed warranty or parts requests. If direct parts aren’t stocked, consider third-party stainless hardware or custom nylon clamps as reliable alternatives that let you stay on the water without waiting.
